Download Additive Manufacturing Book PDF

Download full Additive Manufacturing books PDF, EPUB, Tuebl, Textbook, Mobi or read online Additive Manufacturing anytime and anywhere on any device. Get free access to the library by create an account, fast download and ads free. We cannot guarantee that every book is in the library.

Additive Manufacturing Technologies

Additive Manufacturing Technologies
  • Author : Ian Gibson,David Rosen,Brent Stucker
  • Publisher :Unknown
  • Release Date :2014-11-26
  • Total pages :498
  • ISBN : 9781493921133
GET BOOK HERE

Summary : This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered

Additive Manufacturing: Materials, Processes, Quantifications and Applications

Additive Manufacturing: Materials, Processes, Quantifications and Applications
  • Author : Jing Zhang,Yeon-Gil Jung
  • Publisher :Unknown
  • Release Date :2018-05-17
  • Total pages :362
  • ISBN : 9780128123270
GET BOOK HERE

Summary : Additive Manufacturing: Materials, Processes, Quantifications and Applications is designed to explain the engineering aspects and physical principles of available AM technologies and their most relevant applications. It begins with a review of the recent developments in this technology and then progresses to a discussion of the criteria needed to successfully select an AM technology for the embodiment of a particular design, discussing material compatibility, interfaces issues and strength requirements. The book concludes with a review of the applications in various industries, including bio, energy, aerospace and electronics. This book will be a must read for those interested in a practical, comprehensive introduction to additive manufacturing, an area with tremendous potential for producing high-value, complex, individually customized parts. As 3D printing technology advances, both in hardware and software, together with reduced materials cost and complexity of creating 3D printed items, these applications are quickly expanding into the mass market. Includes a discussion of the historical development and physical principles of current AM technologies Exposes readers to the engineering principles for evaluating and quantifying AM technologies Explores the uses of Additive Manufacturing in various industries, most notably aerospace, medical, energy and electronics

Design for Additive Manufacturing

Design for Additive Manufacturing
  • Author : Martin Leary
  • Publisher :Unknown
  • Release Date :2019-12-03
  • Total pages :358
  • ISBN : 9780128168875
GET BOOK HERE

Summary : Design for Additive Manufacturing is a complete guide to design tools for the manufacturing requirements of AM and how they can enable the optimization of process and product parameters for the reduction of manufacturing costs and effort. This timely synopsis of state-of-the-art design tools for AM brings the reader right up-to-date on the latest methods from both academia and industry. Tools for both metallic and polymeric AM technologies are presented and critically reviewed, along with their manufacturing attributes. Commercial applications of AM are also explained with case studies from a range of industries, thus demonstrating best-practice in AM design. Covers all the commonly used tools for designing for additive manufacturing, as well as descriptions of important emerging technologies Provides systematic methods for optimizing AM process selection for specific production requirement Addresses design tools for both metallic and polymeric AM technologies Includes commercially relevant case studies that showcase best-practice in AM design, including the biomedical, aerospace, defense and automotive sectors

Additive Manufacturing, Second Edition

Additive Manufacturing, Second Edition
  • Author : Amit Bandyopadhyay,Susmita Bose
  • Publisher :Unknown
  • Release Date :2019-10-16
  • Total pages :470
  • ISBN : 9780429881022
GET BOOK HERE

Summary : The field of additive manufacturing is growing dynamically as the interest is persisting from manufacturing sector, including other sectors as well. Conceptually, additive manufacturing is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Second edition of Additive Manufacturing highlights the latest advancements in the field, taking an application oriented approach. It includes new material on traditional polymer based rapid prototyping technologies, additive manufacturing of metals and alloys including related design issues. Each chapter comes with suggested reading, questions for instructors and PowerPoint slides.

Additive Manufacturing

Additive Manufacturing
  • Author : Manu Srivastava,Sandeep Rathee,Sachin Maheshwari,TK Kundra
  • Publisher :Unknown
  • Release Date :2019-09-16
  • Total pages :286
  • ISBN : 9781351049368
GET BOOK HERE

Summary : There is a growing need for manufacturing optimization all over the world. The immense market of Additive Manufacturing (AM) technologies dictates a need for a book that will provide knowledge of the various aspects of AM for anyone interested in learning about this fast-growing topic. This book disseminates knowledge of AM amongst scholars at graduate level, post graduate level, doctoral level, as well as industry personnel. The objective is to offer a state-of-the-art book which covers all aspects of AM and incorporates all information regarding trends, historical developments, classifications, materials, tooling, software issues, dynamic design, principles, limitations, and communication interfaces in a one-stop resource. Features: Breaks down systematic coverage of various aspects of AM within four distinct sections Contains details of various AM techniques based on ASTM guidelines Discusses many AM applications with suitable illustrations Includes recent trends in the field of AM Covers engineering materials utilized as raw materials in AM Compares AM techniques with different traditional manufacturing methods

Additive Manufacturing

Additive Manufacturing
  • Author : Steinar Westhrin Killi
  • Publisher :Unknown
  • Release Date :2017-09-07
  • Total pages :240
  • ISBN : 9781351767484
GET BOOK HERE

Summary : Additive manufacturing has matured from rapid prototyping through the now popular and "maker"-oriented 3D printing, recently commercialized and marketed. The terms describing this technology have changed over time, from "rapid prototyping" to "rapid manufacturing" to "additive manufacturing," which reflects largely a focus on technology. This book discusses the uptake, use, and impact of the additive manufacturing and digital fabrication technology. It augments technical and business-oriented trends with those in product design and design studies. It includes a mix of disciplinary and transdisciplinary trends and is rich in case and design material. The chapters cover a range of design-centered views on additive manufacturing that are rarely addressed in the main conferences and publications, which are still mostly, and importantly, concerned with tools, technologies, and technical development. The chapters also reflect dialogues about transdisciplinarity and the inclusion of domains such as business and aesthetics, narrative, and technology critique. This is a great textbook for graduate students of design, engineering, computer science, marketing, and technology and also for those who are not students but are curious about and interested in what 3D printing really can be used for in the near future.

Additive Manufacturing

Additive Manufacturing
  • Author : Andreas Gebhardt,Jan-Steffen Hötter
  • Publisher :Unknown
  • Release Date :2016
  • Total pages :591
  • ISBN : 1569905827
GET BOOK HERE

Summary : The use of additive manufacturing for the direct production of finished products is becoming increasingly important. The method not only reduces the demands on industrial infrastructure, but also opens up new perspectives in terms of decentralized production and customer inclusive individualized production (customization, cyberproduction). Oriented towards the practitioner, in this book the basics of additive manufacturing are presented and the properties and special aspects of industrially available machines are discussed. From the generation of data to the forming method, the complete process chain is shown in a practical light. In particular, the following additive manufacturing technologies are discussed: - Polymerization (e.g., stereolithography) - Sintering and melting (e.g., laser sintering) - Layer laminate method (e.g., laminated object manufacturing, LOM) - Extrusion (e.g., fused deposition modeling, FDM) - 3D printing Applications for the production of models and prototypes (rapid prototyping), tools, tool inserts, and forms (rapid tooling) as well as end products (rapid manufacturing) are covered in detailed chapters with examples. Questions of efficiency are discussed from a strategic point of view, and also from an operational perspective.

Materials for Additive Manufacturing

Materials for Additive Manufacturing
  • Author : Yusheng Shi,Chunze Yan,Yan Zhou,Jiamin Wu,Yan Wang,Shengfu Yu,Chen Ying
  • Publisher :Unknown
  • Release Date :2021-02-12
  • Total pages :774
  • ISBN : 9780128193037
GET BOOK HERE

Summary : Materials for Additive Manufacturing covers the materials utilized in the additive manufacturing field, including polymers, metals, alloys and ceramic materials. A conceptual overview of the preparation and characterization of the materials and their processing is given, beginning with theoretical aspects that help readers better understand fundamental concepts. Emerging applications in medicine, aerospace, automotive, artwork and rapid manufacturing are also discussed. This book provides a comprehensive overview of materials, along with rapid prototyping technologies. Discusses the preparation and characterization of materials used for additive manufacturing Provides descriptions of microstructures and properties of the parts produced by additive manufacturing Includes recent industrial applications of materials processed in additive manufacturing

Laser Additive Manufacturing

Laser Additive Manufacturing
  • Author : Milan Brandt
  • Publisher :Unknown
  • Release Date :2016-09-01
  • Total pages :498
  • ISBN : 9780081004340
GET BOOK HERE

Summary : Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. Provides a comprehensive one-volume overview of advances in laser additive manufacturing Presents detailed coverage of the latest techniques used for laser additive manufacturing Reviews both established and emerging areas of application

Exam Prep for: Additive Manufacturing

Exam Prep for: Additive Manufacturing
  • Author : Anonim
  • Publisher :Unknown
  • Release Date :2021
  • Total pages :229
  • ISBN : 1230987654XX
GET BOOK HERE

Summary :

Thermo-Mechanical Modeling of Additive Manufacturing

Thermo-Mechanical Modeling of Additive Manufacturing
  • Author : Michael Gouge,Pan Michaleris
  • Publisher :Unknown
  • Release Date :2017-08-03
  • Total pages :294
  • ISBN : 9780128118214
GET BOOK HERE

Summary : Thermo-mechanical Modeling of Additive Manufacturing provides the background, methodology and description of modeling techniques to enable the reader to perform their own accurate and reliable simulations of any additive process. Part I provides an in depth introduction to the fundamentals of additive manufacturing modeling, a description of adaptive mesh strategies, a thorough description of thermal losses and a discussion of residual stress and distortion. Part II applies the engineering fundamentals to direct energy deposition processes including laser cladding, LENS builds, large electron beam parts and an exploration of residual stress and deformation mitigation strategies. Part III concerns the thermo-mechanical modeling of powder bed processes with a description of the heat input model, classical thermo-mechanical modeling, and part scale modeling. The book serves as an essential reference for engineers and technicians in both industry and academia, performing both research and full-scale production. Additive manufacturing processes are revolutionizing production throughout industry. These technologies enable the cost-effective manufacture of small lot parts, rapid repair of damaged components and construction of previously impossible-to-produce geometries. However, the large thermal gradients inherent in these processes incur large residual stresses and mechanical distortion, which can push the finished component out of engineering tolerance. Costly trial-and-error methods are commonly used for failure mitigation. Finite element modeling provides a compelling alternative, allowing for the prediction of residual stresses and distortion, and thus a tool to investigate methods of failure mitigation prior to building. Provides understanding of important components in the finite element modeling of additive manufacturing processes necessary to obtain accurate results Offers a deeper understanding of how the thermal gradients inherent in additive manufacturing induce distortion and residual stresses, and how to mitigate these undesirable phenomena Includes a set of strategies for the modeler to improve computational efficiency when simulating various additive manufacturing processes Serves as an essential reference for engineers and technicians in both industry and academia

Selective Laser Sintering Additive Manufacturing Technology

Selective Laser Sintering Additive Manufacturing Technology
  • Author : Chunze Yan,Yusheng Shi,Li Zhaoqing,Shifeng Wen,Qingsong Wei
  • Publisher :Unknown
  • Release Date :2020-11-20
  • Total pages :972
  • ISBN : 9780081029947
GET BOOK HERE

Summary : Selective Laser Sintering Additive Manufacturing Technology is a unique and comprehensive guide to this emerging technology. It covers in detail the equipment, software algorithms and control systems, material preparations and process technology, precision control, simulation analysis, and provides examples of applications of selective laser sintering (SLS). SLS technology is one of the most promising advances in 3D printing due to the high complexity of parts it can form, short manufacturing cycle, low cost, and wide range of materials it is compatible with. Typical examples of SLS technology include SLS manufacturing casting molds, sand molds (core), injection molds with conformal cooling channels, and rapid prototyping of ceramic and plastic functional parts. It is already widely used in aviation, aerospace, medical treatment, machinery, and numerous other industries. Drawing on world-leading research, the authors provide state of the art descriptions of the technologies, tools, and techniques which are helping academics and engineers use SLS ever more effectively and widely. Provides instructions for how to accurately use SLS for forming Analyses the numerical simulation methods for key SLS technologies Addresses the use of SLS for a range of materials, including polymer, ceramic and coated sand powder

Additive Manufacturing

Additive Manufacturing
  • Author : Emrah Celik
  • Publisher :Unknown
  • Release Date :2020-07-06
  • Total pages :151
  • ISBN : 9781501518782
GET BOOK HERE

Summary : This book covers additive manufacturing of polymers, metals, ceramics, fiber reinforced polymer composites, energy harvesting materials, and biomaterials. Hybrid manufacturing is discussed. Topology optimization methodology is described and finite element software examples are provided. The book is ideal for graduate students and career starters in the industry.

Additive Manufacturing Technologies and Applications

Additive Manufacturing Technologies and Applications
  • Author : Salvatore Brischetto,Paolo Maggiore,Carlo Giovanni Ferro
  • Publisher :Unknown
  • Release Date :2018-07-09
  • Total pages :188
  • ISBN : 9783038425489
GET BOOK HERE

Summary : This book is a printed edition of the Special Issue "Additive Manufacturing Technologies and Applications" that was published in Technologies

Additive Manufacturing

Additive Manufacturing
  • Author : T.S. Srivatsan,T.S. Sudarshan
  • Publisher :Unknown
  • Release Date :2015-09-25
  • Total pages :444
  • ISBN : 9781498714785
GET BOOK HERE

Summary : Get Ready for the Future of Additive Manufacturing Additive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)—the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This process enables users to quickly build three-dimensional objects from the bottom-up, adding material one cross-sectional layer at a time directly from a computer model. This book provides a clear overview of specific technologies related to AM. It covers existing and emerging techniques in AM in use for a wide spectrum of manufacturing applications, and highlights the advantages of each technique with specific references to technological applications. Introduces Valuable Processes for Making Prototype Parts among Manufacturers of Many Types The book outlines many of the processes developed using various materials ranging from metals to plastics, and composites to human tissue. It presents recent innovations and potential viable applications that include: near-net shape capabilities, superior design, geometric flexibility, innovations in fabrication using multiple materials, and reduced tooling and fixturing. It also introduces several illustrations and case studies that focus on the present and far-reaching applications, developments, and future prospects of AM technologies. Written by renowned experts in their fields, this book: Covers the reactive inkjet printing of nylon materials relevant to AM Discusses the AM of metals using the techniques of free space deposition and selective laser melting Provides a comparison between AM materials and human tissues Addresses the use of AM for medical devices and drug and cell delivery Focuses on the relevance of AM to rare earth magnets and more Additive Manufacturing: Innovations, Advances, and Applications emphasizes the use of AM commensurate with advances in technical applications, and provides a solid background on the fundamentals and principles of this rapidly developing field.

Additive Manufacturing: Foundation Knowledge For The Beginners

Additive Manufacturing: Foundation Knowledge For The Beginners
  • Author : Seeram Ramakrishna,Sunpreet Singh,Chander Prakash
  • Publisher :Unknown
  • Release Date :2020-08-04
  • Total pages :176
  • ISBN : 9789811224836
GET BOOK HERE

Summary : This book provides the key fundamental principles, classifications, recent developments, as well as different applications of additive manufacturing technologies. A comprehensive overview of the different classes is given, covering polymer-based, metal-based and ceramic-based systems. Special topics such as bioprinting and 4D printing are also introduced. The authors discuss the technological aspects of additive manufacturing in a very clear and understandable way, delivered with the help of self-illustrating artworks. This book is particularly designed to suit the curriculum requirements of undergraduate and graduate students enrolled in Mechanical Engineering, Material Science, Product Design and Development, Biomedical Engineering, Automobile and Aerospace Engineering, and other closely related domains. Manufacturing professionals working in similar fields may also wish to read it as a refresher and to catch up on recent advances.

Additive Manufacturing of Metals

Additive Manufacturing of Metals
  • Author : David J. Fisher
  • Publisher :Unknown
  • Release Date :2020-02-20
  • Total pages :152
  • ISBN : 9781644900628
GET BOOK HERE

Summary : Additive manufacturing of metals is an increasingly important process for producing or repairing structural components in the aerospace, medical and dental industries. The book reviews the various techniques that are currently in use and describes the many possible applications. The review is based on 350 original resources and includes their direct web link for in-depth reading. Keywords: Additive Manufacturing, 3-Dimensional Printing,, Layered Manufacturing, Titanium Alloys, Nickel Alloys, Iron Alloys, Stainless Steels, Aluminium, Cobalt, Copper, Magnesium, Niobium, Tantal, Tin, Tungsten, Zinc, Porous Metals, Biomedical Materials, Orthopaedic Devices, Dental Implants, Aerospace Components, Laser Melting, Electron-Beam Melting.

BS EN ISO 52950. Additive Manufacturing. General Principles. Overview of Data Processing

BS EN ISO 52950. Additive Manufacturing. General Principles. Overview of Data Processing
  • Author : British Standards Institution
  • Publisher :Unknown
  • Release Date :2019
  • Total pages :15
  • ISBN : OCLC:1197747661
GET BOOK HERE

Summary :

Cold Spray in the Realm of Additive Manufacturing

Cold Spray in the Realm of Additive Manufacturing
  • Author : Sunil Pathak,Gobinda C. Saha
  • Publisher :Unknown
  • Release Date :2020-05-12
  • Total pages :245
  • ISBN : 9783030427566
GET BOOK HERE

Summary : This book sheds light on the development of the cold spray process in applications of additive manufacturing (AM) and repair/remanufacturing engineering. It covers the process fundamentals of different cold spray techniques, namely low pressure cold spray and high pressure cold spray process. Bonding mechanism and powder substrate interface are an important part of the book. The chapters present the recent developments in materials used in cold spraying for AM and various coating applications. The latest research in this area as well as possible avenues of future research are also highlighted as a way to encourage the researchers.

Additive Manufacturing for the Aerospace Industry

Additive Manufacturing for the Aerospace Industry
  • Author : Francis H. Froes,Rodney Boyer
  • Publisher :Unknown
  • Release Date :2019-02-15
  • Total pages :482
  • ISBN : 9780128140635
GET BOOK HERE

Summary : Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. Provides information on a broad range of materials and processes used in additive manufacturing Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry Covers a wide array of materials for use in the additive manufacturing of aerospace parts Discusses current standards in the area of aerospace AM parts

Additive Manufacturing Processes

Additive Manufacturing Processes
  • Author : Sanjay Kumar
  • Publisher :Unknown
  • Release Date :2020-05-26
  • Total pages :205
  • ISBN : 9783030450892
GET BOOK HERE

Summary : This book provides a single-source reference to additive manufacturing, accessible to anyone with a basic background in engineering and materials science. Unlike other books on additive manufacturing that include coverages of things such as machine architecture, applications, business and present market conditions, this book focuses on providing comprehensive coverage of currently available additive manufacturing processes. All processes are explained with the help of various, original diagrams, useful for beginners and advanced researchers alike. Provides comprehensive coverages of all current processes available in additive manufacturing; Explains processes with the help of various original diagrams; Explains future process development at the last chapter, providing research outlook; Includes extensive references at the end of each chapter for further reading of original research.